Manuals & Support
Software Manuals Download
Kaleido System
Artisan System
Hardware Manuals Download
M1
M2
M6
M10
Artisan Connection Guidance
Bluetooth Connection
USB Connection ( Pro vesion only)
Note: Do not plug the USB cord from a Dual machine into the USB port on your computer. It might damage your control board, and it does not connect to your computer through USB. The USB cord on Dual machines is reserved for the Kaleido tablet only.
WIFI Connection (Dual System only, if the kaleido tablet has a Wifi function)
Please kindly note, please do not use special characters, such as []^{}&, etc for WIFI names and passwords, this may result in the inability to search for and join a WIFI network.
USB Drivers for Pro version
The Kaleido Roaster manual is based on Artisan 2.8.4, you can download Artisan 2.8.4 from the following link, or you can download the latest version of the installer from Artisan Scope.
Heating Element Installation
If the machine you received does not have heating elements installed, or if you need to replace the new heating elements, please follow this installation video for heating elements installation.
For M1
For M2
For M6 & M10
Kaleido Maintenance
It is recommended that the drum be cleaned once a month for more frequent use and once every 3 months for less frequent use.
You can follow the cleaning video to clean the drum.
Extended Exhaust Pipe Connection Solution
Please note that if you modify and install an externally extended exhaust pipe yourself, it must not be tightly connected to the roaster's exhaust pipe. This is because the water vapor generated during the roasting process cannot be discharged from the extended exhaust pipe in time, causing the water vapor to condense into small droplets when encountering cold and flow back into the machine's mainboard, leading to a short circuit on the mainboard.
